Current Open Positions
NDI Engineering Company is a privately-held small business consulting firm. NDI provides engineering and technical services to Government clients chartered with responsibility for the defense of our country. NDI offerings include naval architecture, marine, civil, structural, mechanical, and electrical engineering and design services. NDI has a ISO 9001:2015 Certified Quality System and was a prior recipient of the U.S. Small Business Administration Region II, Prime Contractor of the Year Award. NDI's corporate office is located in Thorofare, NJ, with additional offices at the Naval Business Center, Philadelphia, PA, and in Virginia Beach, VA.
NDI Engineering Company is an Equal Opportunity Employer. We are committed to the application of every good faith effort to recruit, hire, train and advance persons in all job titles, without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin, disability or veteran status. NDI Engineering refrains from discharging, or otherwise discriminating against employees or applicants who inquire about, discuss, or disclose their compensation or the compensation of other employees or applicants.
Submit all resumes to recruiting@ndieng.com or fax: 856-848-0277
Click here for NDI EMPLOYMENT APPLICATION
Electrical Engineer:
NDI Engineering Company is seeking an Electrical Engineer with approximately
2 to 4 years of designing experience on either Ship Hull, Mechanical and
Electrical (HM&E), Power Plant Systems or controls engineering. Requires
experience using AutoCAD, or other drafting programs and SKM Power Tools.
Candidate must have a BS Degree in Electrical Engineering from an accredited
school. Candidate must be a U.S. Citizen and be able to obtain and maintain
a U.S. Department of Defense Security Clearance.Location: Thorofare, NJ.
Electronics Technician:
NDI Engineering Company is seeking an Electronics Technician that is
experienced in the assembly and testing of cable and wire harnesses
(including multi-pin connectors), electrical junction boxes, and panel
assemblies. Must be familiar with blueprint and electrical schematics,
preferably military standard. Fiber optics and/or circuit card
certifications are highly desired. Troubleshooting skills and solder
certifications are highly desired. Candidate will use a variety of hand and
power tools, electric meters and material handling equipment in performing
duties. Minimum of 5 years of experience. The candidate must be U.S.
citizen and able to obtain and maintain a U.S. Department of Defense
security clearance. Current clearance is highly desired.Location:
Lakehurst, NJ.
LOGISTICIAN/PROGRAM SUPPORT ASSISTANT:
NDI Engineering Company is seeking hardworking, qualified candidates with
minimum 2 years' experience (active duty military, civilian government or
DOD contractor) Navy preferred. Knowledge of Integrated Logistics Support
products and technical documentation (technical manuals, APLs, procedures
and plans) and databases (TDMIS, CDMD-OA, WindChill) and analyses necessary.
Must be able to respond in a fast paced project environment. Candidate must
possess an Associate's degree in Finance, Business Administration
Engineering or related field. Candidate will be skilled using MS Office
products and possess excellent verbal and written communication skills.
Preference will be given to candidates with Navy shipboard experience in
supply or logistics.
Must be a US citizen and be able to obtain and maintain a US Department of
Defense Security Clearance. Education: AS Degree preferred but not required
if candidate has sufficient military or civilian government experience.
Must be willing to travel. Location: Philadelphia Navy Yard, PA.
Systems Engineer:
NDI Engineering Company is seeking a Systems Engineers to provide Systems
Engineering support for multiple programs including ADMACS integrated
shipboard systems of systems and EMALS/AAG Ship Integration and Production
efforts. These efforts include requirements and risk management, technical
management products, including technical SOW and data requirements
Implementations. Candidates will assist in coordination of technical work,
and providing technical guidance in accordance with DoD Systems Engineering
policies. Support includes tracking and management of contract deliverables
from the prime contractor for the programs. It includes reviewing the
materials and determining if they meet the requirements specified in the
acquisition documents (System Specification, Statement of Work, and Contract
Deliverable Items List) and coordination of the Technical Team inputs for
incorporation to documents. Candidates will assist in reviewing data and
analysis to determine if requirements have been verified and assist with
ship integration coordination/implementations. Support also includes the
coordination of deviations and waivers when the government team determines
it is warranted. This includes support of Systems Engineering Technical
Reviews and production of related material (Presentations, Checklists).
Several positions are available with a range of experience requirements.
Familiarity with DoD and Navy acquisition processes is a requirement for
more senior positions and a plus for junior level positions. Familiarity
with ADMACS, EMALS and AAG systems is a requirement for more senior
positions and a plus for junior level positions. Experience with
Model-based systems engineering and/or systems engineering tools such as
CORE, Rational DOORS, Teamcenter, etc.) strongly desired. Bachelor's Degree
in Engineering or Computer Science is required. Candidates must be U.S.
Citizens and be able to obtain and maintain a U.S. Department of Defense
Security Clearance. Current Secret clearance is strongly desired.Location:
Lakehurst, Joint Base McGuire-Dix-Lakehurst, NJ.
Junior Systems Engineer:
As an engineer in Ship Integration you will be interfacing with numerous
stakeholders including the Subject Mater Experts (SMEs), NAVSEA, NNS
Shipbuilding, and the onsite CAFSU team. This position primarily focuses on
the review/creation of technical documentation including but not limited to
Engineering Change Proposals (ECPs), Request for Variations (RFVs), Request
for Engineering Information (REIs), Departure from Spec (DFS) etc. this
will include coordinating between all stakeholders. You will have the
opportunity to present your findings to the team. In this position you will
often be reviewing Engineering drawings which include electrical schematics
and recommending specific Lock-out Tagouts to be used on the Ford Class
Aircraft Carriers. You will be tracking technical documentation in excel
spreadsheets and reviewing schedules in Microsoft Project. DoD Secret
Security Clearance is required for this position. BS Degree in Mechanical or
Electrical Engineering required. Must have experience with Excel and MS
Project.Location: Lakehurst, NJ.
Senior Engineering Technician:
NDI Engineering Company is seeking a Senior Engineering Technician. Under
the guidance of the System Safety/Reliability & Maintainability Branch, R&M
Lead Engineer, the incumbent manages organizes, and assists in technical
activities associated with Electronic Maintenance Logbook (EML) development
and deployment. The incumbent conducts continuing reviews and evaluations
of assigned R&M programs and their resources to ensure proper and effective
program implementation and execution including processes, people, funding,
and schedule.
Specifically, this position will require the incumbent to perform the
following tasks:
* Analyzes fleet and development data and synthesizes operational
system requirements to develop R&M technical requirements for acquisition
documentation. The incumbent participates in the development of the R&M
strategy that serves as the framework for essential R&M activities.
* The incumbent assists in providing training to the fleet on
databases used to collect maintenance data to include the formulation of
tables, forms, queries and macros. Assists in the creation of user training
videos
* Contributes towards updates to databases targeting areas that
improve collection of relevant R&M metrics and improvements to the user
interface
* The incumbent maintains continuous liaison through correspondence
and visits with contractors, fleet activities, and other Navy facilities to
obtain first hand information and comments on problems, test programs, and
investigations. Attends and hosts meetings, provides briefings to DOD,
NAVAIRSYSCOM, and NAWC officials and program managers addressing project
results, status, recommendations for engineering corrective actions and
management recommendations concerning redirection of test assets, funding,
and tasking required to meet program goals and objectives.
* The incumbent assists in the development of R&M analyses referencing
available databases such as Deckplate, Optimized Organizational Maintenance
Activity (OOMA), Comprehensive Automated Maintenance Environment (CAMEO),
Advanced Skill Management (ASM) and the Universal Flight Test Database. The
incumbent utilizes various commercially available software products such as
Relex, Reliasoft Synthesis, and Raptor.
* Actively participates in the formulation of processes and policies
necessary for execution and sustainment of the EML program. The incumbent
conducts continuing reviews and evaluations of the EML program data
collection efforts to ensure proper and effective resource application and
program success.Location: Patuxent River, MD.
Cyber Security Engineer:
NDI Engineering Company is seeking Cyber Security Engineers with at least 2
years of related experience and the ability to work onsite in Lakehurst, NJ.
Below are job requirements and qualifications for IAT levels II and III.
All positions require an active Department of Defense (DOD) Secret level
clearance with SSBI.
Job Requirements
* Apply DoD and DoN Cyber Security policies and standards.
* Implement patches and changes in accordance DON/NAVAIR policy
* Monitor and assess the security posture of assigned programs and
develop mitigation plans to address identified risks and vulnerabilities.
* Develop Cyber Security/Information Assurance strategies
* Assess system/software risk and vulnerability through the Risk
Management Framework (RMF)
* Perform Risk Management Framework (RMF) activities and develop
program and lab packages for Enterprise Mission Assurance Support Service
(eMASS)
* Prepare Cyber Security support documentation packages.
* Support Cyber Security integration into programs.
. Support Integrated Product Team (IPT) efforts on assigned systems
as Cyber Security SME
. Support IT-related networks, systems, hardware, firmware, and
software security.
Qualifications:
IAT II/Journeyman Level Qualifications: BS degree in IT/Cyber, Software,
Computer Science or Engineering from an accredited college or university,
Security+ CE certification and 3 years hands-on cyber security experience in
the areas detailed above, preferably in a DOD environment. Knowledge of RMF
process and artifact development, development of Security Classification
Guides (SCG), and prior experience with eMASS desired. Experience with MS
System Center Configuration Manager (SCCM), Windows Server Update Services
(WSUS), and Assured Compliance Assessment Solution (ACAS)or Retina scanning
and risk assessment tools are a plus.
IAT III Level Qualifications: BS or MS in IT/Cyber, Software, Computer
Science or Engineering from an accredited college or university, Security+
CE and CISSP (or associate) certifications and at least 5 years of hands on
cyber experience, preferably in DOD environment, using DIACAP/RMF and IAVM
tools, ACAS, and eMASS.Location: Lakehurst, NJ.
Warehouse Inventory Control Supply Technician:
NDI Engineering is seeking a Warehouse Inventory Control Supply Technician
with two (2) years' experience in warehouse inventory including maintaining
acceptable and accurate inventory levels; reporting shortages, overages and
all inventory levels monthly for replenishment; classifying, labeling,
locating and warehousing all inventory for future use. The individual should
also have two (2) years' experience in assemblage of material designated on
packing slips/orders for material; packaging and labeling material for
shipment; receiving incoming shipments of material; retrieving packing
slips, routing incoming material to cognizant requestor or area; retrieving
invoices for signature when necessary; documenting receipt of material.
Individual should have familiarity with Windows operating system environment
as well as familiarity with Microsoft Outlook, Word and Excel. Education:
Individual must possess a High school, trade/industrial school diploma, GED
equivalent. Candidates must have a Department of Defense Confidential
clearance and be a United States Citizen and eligible to obtain and maintain
the DoD clearance. Location: Philadelphia, PA.
Submarine SAIL Electrical Engineering Tech:
NDI Engineering Company is seeking a Submarine SAIL Electrician Engineering
Technician to help support the installation, repair, and maintenance of
submarine sail and towed antenna systems in support of the Naval Surface
Warfare Center.
. Provide training and failure evaluation, to Industrial Activities,
Operational Submarine Force, Regional Support Groups, Fleet Maintenance
Activities, Naval Shipyards, and Maintenance personnel on the installation,
repair and maintenance of submarine sail and towed antenna systems HM&E for
SSN, SSGN and SSBN Class submarines to include but not limited to High Data
Rate Antenna System, Towed Buoy Systems, Communications Antenna Systems,
Imaging/Periscope Systems, Universal Modular Masts Systems, Radar/Navigation
Systems, Snorkel Induction System, Electronic Support Measure Mast System,
Sail Closure Door Systems, and general submarine sail HM&E Systems.
. This will include Subsafe and Non- Subsafe items to support the
Operational Submarine Force.
. Perform various system inspections to including SSN Sail Close-Out
Inspections, SSN Sail INSURV Inspections, SSBN and SSGN Post Refit
Inspections, SSN Submarine Sail Depot Availability In-Progress and
Completion Inspections, SSBN and SSGN Submarine Sail Depot Availability
In-Progress and Completion Inspections at each of the ISEA Representative
on-site locations.
. Update technical databases with issues identified in above
inspections and provide repair recommendations to maintenance facilities
. Review and validate technical documentation.
. Validate system configurations and document discrepancies.
. Perform liaison support during sail zone installations as
requested.
. Represent the local TYCOM/Squadron on technical issues related to
the sail zone and sail HM&E systems on the waterfront
. Must have ACTIVE DOD SECRET CLEARANCE.Location: Agana,Guam.
Junior Computer Programmer - Secret Clearance Required:
NDI Engineering Company is looking for junior programmers having 0-2 years
of experience in web portal development utilizing asp.net with database
backend programming using C++, html, SQL/Oracle. Candidates should also
demonstrate an understanding of network technologies and application
interfaces. Training/experience in Scrum methodologies highly desireable.
The candidate will work as part of an integrated team to redesign, develop,
and implement an updated web portal spanning multiple databases of different
complexity, size, and technologies. Ability to work as part of a team
against set milestones and independently research and recommend approaches
and strategies is a key part of the job.
Job Qualifications:
Minimum of an Associate's Degree in Computer Science, Information
Technology, or an equivalent technical field; Bachelor of Science degree in
Computer Science, IT or Software Engineering is preferred.
US citizenship with Department of Defense Secret level clearance (Interim
clearance acceptable)
Information Assurance certification minimum: Security+ or equivalent
military certification.Location: Thorofare, NJ.
CYBER SECURITY ANALYST:
NDI Engineering Company is looking for candidates with at least 2 years of experience in Cyber Security Engineering to work with a
team of high energy software and system developers in delivering new/updated systems to the Navy. Qualified candidates should
demonstrate a solid 2 years of cyber experience in a development and test environment, with a minimum of one year
of experience using vulnerability analysis tools including, but not limited to, Assured Compliance Assessment Solution (ACAS), Security Technical
Implementation Guides (STIG), Security Content Automation Protocol (SCAP) and Security Requirement Guides (SRG). Training or experience in
implementing the Risk Management Framework (RMF) and associated artifacts and products is required (Platform IT (PIT) Determination package
documentation, System Categorization Form, Information System Continuous Monitoring Strategy (ISCM), Security Plan (SP), Step Concurrence forms, Plan
of Actions and Milestones (POA&M), Security Assessment Plan (SAP), Security Assessment Report (SAR), Risk Assessment Report (RAR), Security
Authorization Package, CYBERSAFE Certification, Package Endorsement Letters) and Enterprise Mission Assurance Support Service (eMASS). The candidate will
oversee IA Vulnerability Management (IAVM) for shipboard, non-shipboard and laboratory IT systems in accordance with system Certification and
Accreditation (C&A) package requirements, generate remediation recommendations for vulnerabilities/issues, and accomplish mitigation
actions. Candidates should be knowledgeable in system architectures, Windows/Linux/Embedded OS, network security (TCP/IP and UDP protocols), and
secure system configuration control. Company-reimbursed travel will be required up to 25% in support of system installations on board Navy ships.
Minimum Qualifications:
Bachelor of Science degree in Computer Science, Electrical Engineering, or Computer Engineering or a Cyber Security related degree from an ABET
accredited program. Two (2) years of Cyber experience including vulnerability analysis and RMF implementation Certifications: Security+ ce;
CISSP a plus. US citizenship; Department of Defense (DoD) Secret Clearance. Location:Philadelphia, PA.
IT/HELP DESK SUPPORT:
NDI is seeking qualified Computer Information System candidates with at least 3 years of professional experience in IT/Help Desk
support and asset management for engineering test site environment. The candidate must be proficient at maintaining and
configuring legacy and updated Windows Operating Systems and have a working knowledge of various levels of network
security. The candidate will perform computer networking services and support a host of Information Technology (IT) hardware and services for
multiple shipboard test and integration sites, including installation and software and security updates. Candidate must be familiar
with help desk tracking software such as Remedy. Must have excellent communications and time management skills, strong analytical
skills, and be a cooperative team player in fast-paced integrated product team environment. Education: Bachelor's Degree in Computer
Information Systems, Computer Science, Computer Engineering, or a related field from an accredited program. Candidates must be a
US Citizen and must possess a Department of Defense Security Clearance, or the ability to obtain and maintain a clearance;
candidates with existing active clearances preferred.Location: Philadelphia, PA.
SOFTWARE ENGINEER:
NDI Engineering is seeking a Software Engineer to design Navy systems supporting various Automatic Fluid Control Systems.
Candidates will perform activities relating to software development, requirements analysis, test
efforts, verification/validation, CMMi, development and integrating automated tracking tools, software standardization and process improvements.
Knowledge of C+, Visual studio, network communications programming in Windows (TCP/IP, Multicast, etc.), and basic knowledge of controls at a
system level will be helpful. Qualifications: Minimum two (2) years related experience in addition to the following: BS in Computer
Engineering or Computer Science from accredited college/university. JavaScript and one or more of the following: SQL Server, MS
Access, HTML, .NET framework, C, C++, JSP, XML, VBA, ASP, Cold Fusion, VB script, JSscript, T-SQL, Visual Basic,
Pascal and Altea. Must be a self-starter, able to work alone, and as part of a team. Security Clearance and U.S. Citizenship required.Location:
Philadelphia, PA.
SENIOR SOFTWARE/CONTROL SYSTEM ENGINEER:
NDI is seeking a senior level engineer with a minimum of seven years of professional experience in the software development
of engineering or industrial machinery control systems using C++, Java, and/or MATLAB, and experience using Microsoft Visual Studio
to develop, compile, and debug source code in C++/CLI, Managed C++, or C# using .NET framework and/or Linux OS. Candidates should
have broad skills including the design and analysis of new software architectures for multi-tiered, distributed control systems,
software modeling, design and development of front-end HMI/GUI, working knowledge of network and communications protocols,
embedded system software development, development of support databases using MS Access and SQL, and experience with plant simulators
for testing. Successful candidates should have at least 2 years of experience as a technical and/or programming lead for a major
system project including evaluation of hardware and software design options, trade-off studies and analyses, and overall management
of the software product life cycle, from requirements to design, test, installation, and system maintenance using CMMI-DEV processes
and IEEE Software standards. The candidate will also develop and update system/software documentation, participate in Software
Configuration Control Boards (CCB), and provide configuration management of software products. Experience in implementing major
upgrades to currently fielded systems is desired, along with the ability to troubleshoot, diagnose, and remediate complex test,
installation and operational problems, both at land-based test sites and on board Navy ships. Demonstrated ability to communicate
clearly and effectively within an integrated team environment, both verbally and in writing, is essential. Education: Bachelor of
Science degree in Computer Science, Electrical Engineering, or Computer Engineering from an ABET accredited program; Master's
degree a plus. Candidates must be a US Citizen and must possess a Department of Defense Security Clearance, or the ability to
obtain and maintain a clearance; candidates with existing active clearances preferred. Location: Philadelphia, PA.
STRUCTURAL/CIVIL ENGINEER:
NDI Engineering Company is seeking a Structural Engineer that has a BS Degree in Civil Engineering, Civil/Structural Engineering
or Naval Architecture with 7 years of experience in design of steel and concrete structures in accordance with American Society of
Civil Engineering (ASCE) standards, and American Institute of Steel Construction (AISC) design manuals. Professional Engineering
License is preferred. Experience with structural analysis programs such as STAAD.pro is a plus. Must be a U.S. Citizen and able
to obtain and maintain an U.S. Department of Defense Security Clearance. Location: Philadelphia, PA.
SYSTEMS ENGINEER:
NDI Engineering Company requires Systems Engineers to provide support for Hull, Mechanical, and Electrical (HM&E) systems
on board US Navy amphibious/auxiliary class ships, including auxiliary air/fluid systems, propulsion, electrical power generation
and distribution systems, machinery control and automation, and mechanical deck systems. Scope of work includes requirements
derivation and management and risk management across design integration, new technology assessments, test, inspection, installation,
and post-delivery support of new acquisition development programs. Candidates will assist in coordination of technical work,
and providing technical guidance in accordance with DoD Systems Engineering policies. Support includes tracking and management of
contract deliverables for the programs in accordance with schedules, reviewing materials and determining if they meet the
requirements specified in the acquisition documents, and coordination of the Technical Team inputs for incorporation to documents.
Candidates will assist in reviewing data and analysis to determine if requirements have been verified and assist with ship
integration coordination/implementations, including coordination of deviations and waivers when the government team determines
it is warranted. Will provide support of Systems Engineering Technical Reviews (SETRs) and production of related material,
participation in Configuration Control Boards (CCBs), and reimbursable travel to meetings (approximately 15%). Several
positions are available with a range of experience requirements. Familiarity with DoD and Navy acquisition processes is a requirement
for more senior positions and a plus for junior level positions. Familiarity with TS9090-310G Navy Modernization Process
Management and Operations desired for senior level positions. Bachelor's Degree in Engineering, Naval Architecture, or related
technical degree is required. Candidates must be U.S. Citizens and be able to obtain and maintain a U.S. Department of Defense
Security Clearance. Current Secret clearance is strongly desired. Location: Philadelphia, PA.
ENGINEER - Mechanical or Electrical:
NDI Engineering Company is seeking either a Mechanical or Electrical Engineer with 6 years of experience to support Navy Land Based
Test Site Hull, Mechanical and Electrical (HM&E) programs onsite at The Navy Yard in Philadelphia. Candidate will work on resolving
technical issues with design and equipment interface, administer documents and track actions, interpret technical questions, and
coordinate responses, review design documentation, and perform site checks. Must possess strong verbal and writing skills and will
have direct engagement with customers and stakeholders on a daily basis. Microsoft Office skills are required, Primavera project
management skills a plus. Candidates must possess a Bachelor of Science of Engineering degree. Candidates must be a U.S. Citizen and
have an active Department of Defense clearance. A current CAC (Common Access Card) holder preferred. Location: Philadelphia, PA.
SYSTEMS ENGINEER - Lakehurst, NJ:
NDI Engineering Company requires Systems Engineers to provide Systems Engineering support for EMALS/AAG Ship Integration and
Production efforts which include requirements and risk management, technical management products, including technical SOW and data
requirements Implementations. Opportunities are also available for support of integrated shipboard systems of systems. Candidates
will assist in coordination of technical work, and providing technical guidance in accordance with DoD Systems Engineering policies.
Support includes tracking and management of contract deliverables from the prime contractor for the programs. It includes reviewing
the materials and determining if they meet the requirements specified in the acquisition documents (System Specification, Statement of
Work, and Contract Deliverable Items List) and coordination of the EMALS/AAG Technical Team inputs for incorporation to documents.
Candidates will assist in reviewing data and analysis to determine if requirements have been verified and assist with ship integration
coordination/implementations. Support also includes the coordination of deviations and waivers when the government team determines it
is warranted. This includes support of Systems Engineering Technical Reviews and production of related material (Presentations, Checklists).
Several positions are available with a range of experience requirements. Familiarity with DoD and Navy acquisition processes
is a requirement for more senior positions and a plus for junior level positions. Familiarity with EMALS and AAG systems is a
requirement for more senior positions and a plus for junior level positions. Experience with Systems Engineering tools such as CORE,
Rational DOORS, Teamcenter, etc. strongly desired. Bachelors Degree in Engineering or Computer Science is required. Candidates must
be U.S. Citizens and be able to obtain and maintain a U.S. Department of Defense Security Clearance. Current Secret clearance is
strongly desired. This is a full-time position. Location: Lakehurst, NJ.
NAVAL ARCHITECT:
NDI Engineering Company provides ship design, naval architecture, marine engineering, and professional services to the Department of Defense, the Department of Homeland Security, and commercial maritime industry. We have an immediate need for entry to mid-level Naval Architects in our Philadelphia, PA and Thorofare, NJ offices to support our current and emerging programs. GENERAL REQUIREMENTS:
- Experience in ship design, planning and production, alterations, and complex ship operations.
- Experience with developing and reviewing calculations, technical reports, and various technical materials including weights and moments, vessel trim and stability, structural and vibration analysis, and other naval architect related issues.
- Perform ship design studies, analysis of alternatives, design reviews, and engineering analyses.
- Perform ship checks to evaluate and validate engineering designs with vessel systems and structures.
- Interpret ships drawing information and mark-ups and communicate required drawing changes to designers/draftsmen and technicians.
- Provide quality review of drawings and technical products developed by department staff.
- Familiarity with various rules and regulatory bodies including ABS, USCG, SOLAS, MIL-standards.
- Work independently under the general guidance of department senior professional staff.
- Professionally interface and communicate with customers and vendors.
- Demonstrate experience in AutoCAD (3D-modeling including Rhino a plus).
- Experience with naval architecture software such as General HydroStatics (GHS) and Fastship.
- Experience with Computational Fluid Dynamics (CFD) a plus.
- Experience with Finite Element Analysis (FEA) a plus.
- Available to travel both continental U.S. and outside continental U.S.
MINIMUM SKILL REQUIREMENTS:
- Bachelor of Science Degree in Naval Architecture or similar degree.
- One (1) to ten (10) years of experience in the maritime industry.
- Proficiency in the use of AutoCAD, 3D modeling, Finite Element Analysis (FEA) and GHS a plus.
- Ability and experience managing multiple projects simultaneously.
- Ability to conduct ship checks.
- Work independently (with minimal supervision) or on project teams.
- Strong communication, written and documentation skills.
- Proof of US citizenship. Must have or be able to obtain and maintain an US DoD security clearance. Location: Philadelphia, PA.
BOILER PLANT CONTROLS ENGINEERING TECHNICIAN:
NDI Engineering is seeking experienced Boiler Plant Controls technicians for full-time work at the Naval Surface Warfare Center
(NSWC) at the Philadelphia Navy Yard. Requires at least 5-7 years experience in general, planned, and corrective maintenance of
shipboard steam plant controls, and an understanding of maintenance planning, and RMMCO check-in/check-out processes and
responsibilities. Individual shall have a general understanding of the operation of shipboard steam plants and associated controls,
including console readouts, indicators, alarms, control valves, and governors. Work will require an estimated 30% reimbursable
travel to Navy ships, both CONUS and OCONUS. Individual must possess a high school, trade/industrial school diploma, GED equivalent;
completion of training on the maintenance and operation of Steam Plants/Power Plants/Boiler Controls or technical or military school
course of study in mechanical/electrical/electronic/control systems theory is highly desirable. Must be a U.S. Citizen with an
active U.S. Department of Defense Secret level Security Clearance. Location: Philadelphia, PA.
JR MECHANICAL ENGINEER:
NDI Engineering Company is seeking an entry-level mechanical engineer. Must be able to apply engineering principles to
investigate, analyze, plan, design, develop, implement, test and evaluate systems, subsystems, components, and parts.
The selected candidate will be part of a project team associated with Advanced Landing and Recovery Systems (ALRE) deployed
on US Navy aircraft carriers and will interface with senior engineers, program managers, U.S. Navy civilian engineers, prime
contractors and original equipment manufacturers. Must be a U.S. Citizen and eligible to obtain and maintain a U.S. Department
of Defense Security Clearance. BS degree in Mechanical Engineering. Experience: 1-3 years of mechanical engineering systems
experience (will consider recent graduate with applicable co-op/intern experience). Location: Thorofare, NJ.
QUALITY ASSURANCE SPECIALIST/TECHNICIAN:
NDI Engineering Company is seeking a QA Technician with a minimum of five years of experience in reading engineering drawings,
geometric dimensioning and tolerancing (GD&T), and familiarity with commercial and military specifications. Familiarity with NAVAIR
drawing formats, MPRs, and MIL specs is preferred but not required. Experience in the measurement and inspection of mechanical
components similar to those used in Aircraft Launch and Recovery Systems. In addition, experience in administration of and/or
support of Quality Management Systems such as MIL-I-45208, ISO 9001 or equivalent and relevant knowledge of DOD procurement
processes and DOD supply system organization with regard to executing contract quality assurance requirements and management
of deficient products is desired. Candidate shall have a minimum of five years of experience in performing product inspection
and conformance verification. Experience needed in using manual verification tools (e.g. gages, calipers, etc.), non-destructive
test methods (e.g. magnetic particle inspection), and automated methods (e.g. operation and programing of coordinate measuring
machines using PC-DMIS and Zeiss Calypso software). The candidate must be a US citizen and be able to obtain and maintain a
Department of Defense Security Clearance. Location: Lakehurst, NJ.
SOFTWARE ENGINEER:
NDI Engineering Company is seeking a Software Engineer with experience in the design, development, test, and integration of software
systems in an autonomous control environment. Candidates must demonstrate knowledge of SDLC processes and have previous development
experience in GUI development and signal processing using Java/C++ and experience with either Windows 7/10 or Linux OS. The candidate
will be responsible for new code development for modernization projects, software porting of legacy software, OS porting, system and
software testing, and implementation of security controls. Candidates should have a working knowledge of version control software
and implementation as well as Configuration Management best practices. Candidates will also assist in the preparation of software
specifications and related updates for technical manuals, product specifications, and user training materials. Work with related
hardware including PLCs a real plus. Location: Philadelphia Navy Yard Bachelors Degree in Computer Science, Electrical or Computer
Engineering and a minimum of 2 years related professional work experience required. Candidates must be a US Citizen and must either
have a DoD Secret clearance, or be able to obtain/maintain a DoD Secret clearance. Location: Philadelphia, PA.
MECHANICAL/ELECTRICAL ENGINEER:
NDI Engineering is seeking a Mechanical or Electrical Engineer with experience in control systems to support the role as test engineer
for U.S. Navy shipboard and land-based test site control systems. The selected candidate will perform: Test U.S. Navy Ship Fuel
Control System (FCS) software during configuration management builds and formal cold test evolutions using FCS simulators; When
necessary manage a test team to assist with executing test procedure. Ensure that all elements of the test procedure are completed
satisfactorily; Identify FCS software testing needs/ resources and attend daily Land-Based Engineering Site (LBES) stand-up meetings
to de-conflict resources with other programs; Assist software developers with testing Software Process Improvement Record (SPIR)
fixes during unit testing; Assist with troubleshooting issues to determine if issue is hardware or software based; Integrate FCS
testing/troubleshooting efforts with MCS and other related hardware components; Write SPIRs for issues discovered during testing;
Communicate severity to FCS Project Team Lead; Work with test coordinator lead and software lead to determine prioritization; Assist
with design and development of new FCS simulators in LBES; Review drawings and make design recommendations; est and troubleshoot
newly installed simulators; Attend daily and weekly status meetings; Communicate status of FCS issues and resource needs at daily
stand-up meetings and weekly software meetings as appropriate; Communicate status of testing efforts with external teams and at
weekly DDG FCS Team meeting. The candidate will interface directly with multi-disciplined engineers, engineering technicians, CAD
technicians, program managers, and other personnel within the customers project teams. BS in Mechanical or Electrical Engineering;
3-10 years of engineering experience. Knowledge and experience with U.S. Navy ship hull, mechanical, and electrical systems design
and operation, is preferred. The candidate must be a US citizen and be able to obtain and maintain a Department of Defense
Security Clearance. Location: Philadelphia, PA.
ELECTRICAL ENGINEER:
NDI Engineering Company is seeking Electrical Engineers with 1 to 5 years of
experience to work on U.S. Navy electrical CAD drawings. Drawings will
include system and equipment arrangements, system diagrams, components,
assemblies and sub-assemblies, material lists, and identification tables.
Requires some experience using AutoCAD, Inventor, or Creo. Candidate must
have a BS Degree in Electrical Engineering from an accredited school.
Candidate must be a U.S. Citizen and be able to obtain and maintain a U.S.
Department of Defense Security Clearance. Location: Thorofare, NJ.
ELECTRICAL ENGINEERS:
NDI Engineering Company requires experienced Electrical Engineers with 3 to 10 years of experience to work with the US
Navy's Electromagnetic Aircraft Launch System (EMALS). Desired experience: Power Concentration System (PCS); Prime Power
Interface Subsystem (PPIS); Printed circuit board (PCB) and printed circuit board assembly (PCBA) manufacturing experience;
High power electronics (IGBT, SCR, inverters, rectifiers, etc.); Power supplies (including high frequency ~50kHz); Power
magnetics (transformers, inductors). Candidates should also be familiar with: Multi-level power converters, specifically neutral point
clamped inverters; Thyristors; Snubber circuits for switching transients; and power electronics experience with high power (>1 MW)
components is a plus. Candidates must have a BS Degree in Electrical Engineering from an accredited school. Candidates must be a U.S.
Citizen and be able to obtain and maintain a U.S. Department of Defense Security Clearance. This is a full-time position at Lakehurst,
Joint Base McGuire-Dix-Lakehurst, NJ. Location: Lakehurst, NJ.
MECHANICAL TECHNICIAN:
NDI Engineering Company is seeking a mechanical technician with strong electronic and electrical troubleshooting skills and
possesses a good working aptitude for mechanical, electrical and CNC repair. Needs to diagnose and repair production
machines; e.g. mills, lathes, etc. Machinery mechanics work with fine, critical dimensions for almost every part.
Work from sketches, diagrams, blueprints, written specifications, or oral instructions. The control of quality and accuracy
is met by the machinists' use of precision measuring devices to include micrometers, vernier gauges, and various other gauges
and the subsequent adjustment of machine tool controls. Minimum of 10 years' experience. The candidate must be U.S. citizen
and able to obtain and maintain a U.S. Government security clearance. Location: Lakehurst, NJ.
MECHANICAL ENGINEER:
NDI Engineering Company requires an experienced Mechanical Engineer with 3 to 5 years of experience to work with the US
Navy's Electromagnetic Aircraft Launch System (EMALS). Desired experience: Emphasis in mechanics of materials; i.e.
stress, strain, and fatigue principals; Strong in machine design encompassing but not limited to the following: basic
rules in material selection, understanding galvanic corrosion, principles of bolted connections; Working knowledge of
finite-element analysis principles; Working knowledge of geometric dimensioning and tolerancing; Read and review engineering
drawings; CAD and 3D modeling: preferable experience in PTC CREO and AUTOCAD. Also the following experience/knowledge is
consider a plus, but not required: principles of fracture analysis, dimensional tolerance analysis using a statistical
approach. Candidates must have a BS Degree in Mechanical Engineering from an accredited school. Candidates must be a U.S.
Citizen and be able to obtain and maintain a U.S. Department of Defense Security Clearance. This is a full-time position at
Lakehurst, Joint Base McGuire-Dix-Lakehurst, NJ. Location: Lakehurst, NJ.
ELECTRONICS TECHNICIANS:
NDI Engineering Company is seeking several Electronics Technicians that are experienced in the assembly and testing of
cable and wire harnesses, electrical junction boxes, and panel assemblies. Must be familiar with blueprint and electrical
schematics, preferably military standard. Fiber optics and/or circuit card certifications are highly desired. Candidate
will use a variety of hand and power tools, electric meters and material handling equipment in performing duties. Minimum
of 3 years of experience. The candidate must be U.S. citizen and able to obtain and maintain a U.S. Department of Defense
security clearance. Location: Lakehurst, NJ
ENGINEERS/TECHNICIANS:
NDI Engineering Company is seeking Engineers/Technicians with electronics experience. Candidates will support deployment
readiness and post installation testing of the submarine antenna system approximately 3 weeks of travel every two months.
Become a Subject Matter Expert in the Radio Frequency Distribution and Control System (RFDACS) and OE-592/538 submarine
multifunction mast antenna systems. Respond to technical assistance requests. Maintain configuration management as assigned
for fielded submarine systems, including software/firmware to platform mapping, and serial number to platform mapping.
Review and provide comments and recommendations for all RFDACS and OE-592/538 related engineering updates. Submit weekly
status reports and participate in program and team meetings as assigned. Education: Bachelor's Degree in Engineering or
equivalent experience. Candidates must be a US Citizen and must possess a Department of Defense Security Clearance, or the
ability to obtain and maintain a clearance; candidates with existing active clearances preferred. Location: Philadelphia, PA.
CYBER SECURITY ENGINEER:
NDI Engineering Company is looking for successful candidates fluent in DOD Risk Management Framework
(RMF) certification/accreditation processes, the development of required artifacts, and a working
knowledge of the applicable DoD instructions and policies with respect to Platform Information Technology
(PIT) and PIT Interconnections Information Assurance. Candidates should have a demonstrated understanding
of the technical, engineering, and programmatic capabilities related to information systems and/or
subsystems within the operational context of an overall machinery control system. The ideal candidate
will have experience in RMF Assessment and Authorization (A&A), technical security features testing &
analysis, risk analysis, DOD Cyber tools (ACAS, SCAP, eMASS), and experience in developing and
implementing Cybersecurity Strategies in a DOD acquisition environment. The position requires a BS in
Computer Science, Computer Engineering, Engineering or related degree, with 2-5 years of relevant
experience, including the Certification and Accreditation (C&A) process and development of Risk
Management Framework (RMF) certification packages. CompTIA Security + required; CISSP/CISM a plus.
Cyber Security Work Force (CSWF) candidates must be an U.S. Citizen and possess an active Secret
clearance; an SBBI investigation will be required. Location: Philadelphia, PA.
VIRGINIA BEACH/NORFOLK AREA POSITIONS:
ELECTRICAL DESIGN ENGINEER-Virginia Beach VA:
NDI Engineering Company is seeking a Radio Frequency (RF)
Electrical/Electronics Design Engineer with 6 plus years in development and
designing of RF circuits, circuit boards, antennas and prototyping if
requirements. Extensive experience in Radio Frequency surveillance
equipment and RF signals is required. BS degree in Electrical Engineering
required from accredited school. Candidates must be a US Citizen and must
possess a Department of Defense Security Clearance, or the ability to obtain
and maintain a clearance; candidates with existing active clearances
preferred. Location: Virginia Beach, VA.
MECHANICAL ENGINEER:
NDI Engineering Company is seeking an immediate Marine Engineer in the Virginia Beach/Norfolk, VA area. Candidate will
support the design and engineering of Hull, Mechanical, and Electrical (HM&E) client shipboard installations of berthing
modules and related hotel services aboard a Military Sealift Command (MSC) vessel. Candidate must have demonstrated 15+
years experience with designing maritime or navy related shipboard MH&E. Previous experience with design and drawing for
installation of HM&E aboard MSC vessels is a plus. Experience Must be a U.S. Citizen and able to obtain and maintain a U.S.
Department of Defense Security Clearance. Location: Virginia Beach/Norfolk, VA.
ENGINEER:
* BACHELOR'S Degree in Marine/Mechanical Engineering, Electrical Engineering, and/or Naval Architecture corresponding to the
specific Senior Engineering role.
* Familiar with commercial ship operations, marine engineering projects, reliability engineering and complex project management.
* Six (6) years of project management experience, with at least two (2) complex ship design or conversion projects as the
Project Engineer or Project Manager.
* Experience in both commercial and U.S. Naval Ship design and construction.
* Registration as a Professional Engineer or Engineer in Training.
* Post Graduate coursework or certification in project management. Location: Virginia Beach, VA.
JUNIOR ENGINEER:
* BACHELOR'S degree in engineering or similar technical degree.
* One (1) year technical experience with commercial ship operations and maintenance with an emphasis on maintenance and
maintenance studies and technical data review. Location: Virginia Beach, VA.
LEAD NAVAL ARCHITECT:
* Master's Degree in Naval Architecture or structural engineering program.
* Eight (8) years post-graduate experience in complex hull structures (including various materials), stability, ship salvage
and dry-docking operations.
* Familiar with the development of work items, drawings, analysis, cost estimates, and technical reports for ship repair or
related projects. Location: Virginia Beach, VA.
LEAD QA ENGINEER:
* BACHELOR'S Degree in Marine/Mechanical Engineering, Electrical Engineering or Naval Architecture.
* Six (6) years' experience as a quality assurance engineer working for a ship builder, ship repairer, ship owner or design
experience in an engineering related field to marine engineering and naval architecture. Location: Virginia Beach, VA.
CIVIL ENGINEER - Virginia Beach, VA:
Basgier and Associates, a Division of NDI Engineering Company, is a well-established Civil Engineering, Surveying and Land
Planning firm that has an opening for a full time degreed Civil Engineer with 2 years' experience (minimum). Candidate must
be able to design and prepare engineering plans for land development projects such as subdivisions, commercial and residential
sites. Must have AutoCAD (Carlson software preferred). Benefits provided include PTO, insurance and 401K. Salary negotiable.
Location: Virginia Beach, VA.